Compliance

EUDR country risk tiers for timber: what the classification changes for your shipments

6 November 2026·10 min read·goEUDR

Under Regulation (EU) 2023/1115, the EUDR country risk classification changes how much due diligence work a timber importer needs to do, and how likely the shipment is to attract authority scrutiny. It does not remove the need for geolocation, supplier evidence or a due diligence statement (DDS). For timber products, the regulation applies from 30 December 2026. By that point, importers need a working process for collecting harvest data, checking risk and filing DDS submissions in the TRACES EUDR module before products are placed on the EU market.

What the three tiers are and where they come from

Article 29 of Regulation (EU) 2023/1115 creates a three tier classification for producing countries. The categories are low risk, standard risk and high risk. The Commission uses several inputs when assigning a country to a tier, with FAO Global Forest Resources Assessment data forming a major part of the assessment.

The classification matters because it changes the level of regulatory scrutiny and the amount of due diligence work expected from operators. Before the first country list was published, every country was treated as standard risk by default.

The first and still current classification list is Commission Implementing Regulation (EU) 2025/1093 of 22 May 2025. Under that list, 140 countries are classified as low risk, four countries are classified as high risk, and every country not named falls into the standard risk category.

For timber importers, this creates a practical split between origins where a lighter due diligence route may apply and origins where the full risk assessment and mitigation process remains mandatory.

What the current country list looks like

Many major timber producing and processing countries are currently classed as low risk. Examples relevant to timber include all EU member states, the United Kingdom, the United States, Canada, China, Ukraine, Vietnam, Thailand, Gabon and Congo.

Standard risk countries include several large timber origins and processing hubs used by EU importers. Brazil, Indonesia, Malaysia, the Democratic Republic of the Congo, Cameroon, Mozambique and Angola are all currently standard risk.

The four high risk countries are Belarus, the Democratic People's Republic of Korea (North Korea), Myanmar and the Russian Federation.

One point causes confusion in purchasing teams. The classification is based on the country of production, meaning where the timber was harvested. It is not based on the export port, the country where the sawmill operates or the country issuing the invoice.

A plywood shipment exported from China but manufactured from Russian birch veneer is still tied to the Russian Federation as the harvest origin. A container loaded in Antwerp with tropical hardwood harvested in Cameroon is still treated as Cameroon origin for EUDR purposes.

What the tier actually changes

The country tier changes three practical things for importers.

  • The minimum level of checks that competent authorities must carry out.
  • Whether the lighter due diligence route is available.
  • The expected depth of risk assessment and mitigation.

Competent authorities must carry out minimum annual checks on operators handling each commodity. For low risk origins, the minimum level is 1% of relevant operators. For standard risk, it rises to 3%. For high risk countries, authorities must check at least 9% of operators and at least 9% of the relevant volume.

Low risk status also opens the lighter due diligence route. In practice, this means the operator still collects all required information, including geolocation data, supplier evidence and product details, and still confirms that the risk is no more than negligible. What changes is that the operator does not run the full risk assessment and mitigation process required for standard risk origins.

That distinction matters because some suppliers assume low risk means no DDS or no geolocation work. That is incorrect. Geolocation data, the information set behind the DDS and the DDS filing itself are required in all three tiers.

The DDS must still be submitted through the TRACES EUDR module before the timber is placed on the EU market or exported. Records and supporting evidence must be retained for five years.

For geolocation, a polygon is required for plots above 4 hectares. A single point is accepted for plots at or below 4 hectares. Many importers are using JRC Global Forest Cover as an initial free screening reference before reviewing supplier evidence in more detail.

What standard risk means in day to day timber imports

Standard risk does not mean prohibited or unacceptable. It means the importer must complete the full due diligence process.

Take a container arriving in Rotterdam with mixed timber products. The shipment contains Brazilian decking boards, Indonesian plywood and oak flooring from Poland. The Polish material may qualify for the lighter low risk route. The Brazilian and Indonesian products still require full risk assessment and mitigation because both harvest origins are currently standard risk.

That normally means checking harvest area geolocation against deforestation indicators, reviewing harvest permits and transport documents, examining supplier consistency over time and identifying gaps in traceability.

Mixed containers create operational headaches because one DDS may contain products with different harvest origins and different due diligence paths. Importers often find they need line item level document management instead of relying on a single supplier declaration for the whole shipment.

Another common issue is transformed products. A Malaysian trader may ship finger jointed panels produced from timber harvested in Cameroon. The country that matters is Cameroon, not Malaysia. Your procurement system needs to capture harvest origin data separately from export country data.

High risk origins and the sourcing reality

The four high risk countries are Belarus, North Korea, Myanmar and the Russian Federation. Sanctions connected to EUDR relevant commodities are one of the triggers for automatic high risk classification.

For timber sourcing teams, the practical consequence is straightforward. Any supply chain touching these origins attracts a very high level of regulatory attention and requires extensive scrutiny.

In practice, many EU importers are already avoiding these origins altogether because sanctions compliance, payment restrictions, vessel screening and traceability checks create operational exposure beyond the EUDR itself.

Indirect sourcing is where problems usually appear. Birch plywood sold through a Turkish intermediary, teak routed through a third country processor or sawn timber blended at a regional distribution hub can all create hidden harvest origin exposure if supplier controls are weak.

At high risk level, competent authorities are expected to examine both operators and physical trade volume at a much higher rate. A supply chain that cannot clearly separate material origins is likely to become difficult to defend during an inspection.

How to use the tier in your own risk assessment

The country classification is a starting point, not the entire risk assessment.

A low risk origin still requires evidence collection and internal review. A standard risk origin does not automatically mean the shipment fails. The importer still needs to assess whether the risk can be reduced to negligible through documentation and controls.

Good operators are treating the country tier as one factor within a wider supplier evaluation process. They combine it with supplier history, species risk, corruption exposure, sanctions screening, harvesting complexity and consistency of geolocation records.

Supplier conversations matter here. Some exporters are already telling buyers that low risk status removes the need for plot data or DDS preparation. Others argue that standard risk is only a political label and should not trigger extra requests.

The practical answer is simple. The regulation still requires the importer to hold sufficient information and submit a DDS in TRACES. If the supplier will not provide harvest geolocation, supporting evidence or traceability records, the importer carries the exposure.

Penalties under Regulation (EU) 2023/1115 are severe. They include fines of at least 4% of EU turnover, confiscation of products and related revenue, and exclusion from public procurement.

The list can change, so keep checking it

Article 29 does not set a fixed review cycle for country classifications. The Commission has said publicly that it envisages a first review in 2026.

That means importers should not build compliance processes around the assumption that today's country status will remain unchanged. Procurement teams should re check the classification periodically and build supplier contracts that allow for changing due diligence requirements if a harvest country moves between tiers.

Several importers are already adding quarterly reviews of harvest origins and supplier country status into their compliance calendars so purchasing decisions are not based on outdated assumptions.

goEUDR helps timber importers prepare geolocation files, supplier evidence packs and due diligence statements ahead of the 30 December 2026 deadline. The service also tracks harvest origin data and supplier documentation workflows. There is a waitlist on the site.

This content is provided for general information and does not constitute legal advice.

Sourcing from several origins?

goEUDR collects supplier data, geolocation files and harvest origin evidence, then prepares the due diligence statement for filing, with a human signing off on every submission.

Join the waitlist